Assistant Professor Anthony W. Dean, PH.D., MBA

Associate Director of Ship Maintenance,

Repair and Operations Institute

Department of Mechanical Engineering Technology,

Old Dominion University

111D Kaufman Hall,

Norfolk, Virginia 23529-0248

(757)683-3769 (voice), (757)683-5655 (fax), (757)589-1357 (cell)

adean@odu.edu (email)

Academic Research Activity 2002-2006 (Awarded)

• Raytheon Technical Services Company, LLC – Depot Operations, Requirements Analysis for Condition Based Architecture to provide Sense and Response Readiness for High Value, Strategic, and Theater Assets, PI, $30,000, 2006
• U.S. Department of Energy/ Commonwealth of Virginia, Department of Mines Minerals and Energy, Industrial Technologies-IOF Virginia Energy and Environmental Network, Co-PI, $30,000, 2005-2006
• NASA/ASEE Summer Faculty Fellowship, Development of System Models to Aid in Theoretical Cost Analysis of New or Future Technologies, NASA Langley Research Center–Aerospace Systems, Concepts and Analysis Competency Branch, $12,000, 2004
• U.S. Department of Energy/ Commonwealth of Virginia, Department of Mines Minerals and Energy, Industrial Technologies-IOF Virginia Energy and Environmental Network, Co-PI, $124,479, 2004-2005
• Grant funding from Virginia Dominion Power in support of WOMENGINEERS DAY 2004, Grant Authors: Dorsey, C., A. Dean and C. Considine, $5,000.00
• Grant funding from Siemens VDO in support of WOMENGINEERS DAY 2004, Grant Authors: Dorsey, C., C. Considine and A. Dean , $2,000.00
• Grant funding from Northrop Grumman-Newport News in support of WOMENGINEERS DAY 2004, Grant Authors: Dean, A., C. Dorsey, and C. Considine, $3,000.00
• Grant funding from BB&T in support of WOMENGINEERS DAY 2004, Grant Authors: Dean, A., C. Dorsey, and C. Considine, $500.00
• U.S. Department of Energy/ Commonwealth of Virginia, Department of Mines Minerals and Energy, Industrial Technologies-IOF Virginia Energy and Environmental Network, Co-PI, $124,479, 2004-2005
• AMSEC LLC, Decision Support System for Maintenance Assessment Phase II, PI, $30,000, 2003-200
• AMSEC LLC, Decision Support System for Maintenance Assessment, co-PI, $30,000 2002-2003
• AMSEC LLC, "Ship Repair Decision Model Feasibility Study", co-PI, $5,000, 2002

Refereed Publications (Journal/Conference/SYMPOSYUM)

• Dean, A., B. Anthony and L. Vahala, "Addressing Student Retention in Engineering and Engineering Technology Through the Use of a Multidisciplinary Freshman Course," Conference Proceedings American Society of Engineering Education, 2007
• Dean, A., G. Crossman and G. Reina, "Developing a New Program in Marine Engineering Technology: Once the Program Begins to Take Shape, What Next? – How Can It Keep Its Momentum Moving Forward?," Conference Proceedings American Society of Engineering Education, 2007
• Crossman, G. and A. Dean , "A General Engineering Technology Program in Motorsports Technology," Conference Proceedings American Society of Engineering Education, 2007
• Moustafa, M., A. Dean , and J. Moustafa, "Using Basic Computer-Aided Drafting and Design Courses at the Freshman Level to Improve Technology Students Competitiveness in Obtaining Early Academic Career Internships," Conference Proceedings American Society of Engineering Education, 2007
• Flory IV, I. A. Dean , N. Dahman, J. Hackworth and G. Crossman, "The Development of Cross-Discipline Plans of Study with in Existing Engineering Technology Programs to Satisfy Industry Needs," Proceedings International Journal of Modern Engineering – INTERTECH Conference, 2006
• Dahman N., A. Dean , I. Flory IV, "The Modernization of the Surveying Engineering Program at Old Dominion University," Proceedings International Journal of Modern Engineering – INTERTECH Conference, 2006
• Dean, A., G. Crossman, A. Verma, I. Flory IV, N. Dahman, and S. Hsiung, "Developing a New Program in Marine Engineering Technology," Proceedings International Journal of Modern Engineering – INTERTECH Conference, 2006
• Hsuing, S. and A. Dean , "The Design and Implementation of Multiple Processors in Control of Multiple High Power DC Motors", Proceedings International Journal of Modern Engineering – INTERTECH 9th Annual International Conference, 2006
• Dean, A., G. Crossman, and A. Verma "Developing a New Program in Marine Engineering Technology," Conference Proceedings American Society of Engineering Education, 2006
• Crossman, G. and A. Dean , "Introducing the Engineering Technology Programs to all Incoming Freshmen Engineering and Technology Students," Conference Proceedings American Society of Engineering Education, 2006
• Kauffmann, P., A. Dean , and P. Lunsford, "A Statistical Evaluation of Sea Valve Failure Rates," Naval Engineers Journal, Vol. 117 No. 2, American Society of Naval Engineers, Spring 2005
• Lin, C. and A. Dean , "Assembly CAD Design Using Position Tolerance in Geometric Dimensioning and Tolerancing," SME Technical Paper TP05 –PUB230, Society of Manufacturing Engineers, November 2005
• Crossman, G., C. Lin and A. Dean , "Achieving Course Objectives through Design, Simulation and Implementation: Re-Development of an Automation and Controls Laboratory, " SME Technical Paper TP05 –PUB299, Society of Manufacturing Engineers, November 2005
• Dean, A., C. L. Considine and G. R. Crossman, "Lessons Learned and Best Practices for using an Analytic Strategy Approach for the Creation of Virtual Laboratories for Distance Learning in Engineering Technology," Conference Proceedings American Society of Engineering Education, 2005
• C. Y. Lin and A. Dean , "Assembly CAD Design Using Position Tolerance in Geometric Dimensioning and Tolerancing," Proceedings CIMEC (CIRP International Manufacturing Education Conference) 2005 and 3rd SME International conference on Manufacturing Education, 2005
• G. Crossman, C. Lin and A. Dean , "Achieving Course Objectives through Design, Simulation and Implementation: Re-Development of an Automation and Controls Laboratory" Proceedings CIMEC (CIRP International Manufacturing Education Conference) 2005 and 3rd SME International conference on Manufacturing Education, 2005
• Dean, A., "Modeling Complexity: Holism verses reductionism and the potential for distortion and errors that may occur due to either diminution or abstraction of a complex system," Conference Proceedings American Society of Engineering Management, 2004
• Dean, A., P. Kauffmann, K. Alexander and N. Bradshaw, "Use of the Resulting Risk Priority Numbers from a Failure Modes Analysis on Ship Systems to Model Maintenance Assessment Policies," Naval Engineers Journal, 2004 (Accepted for Publication, revisions pending)
• Considine, C., A. Dean and A. Sousa-Poza, "Job Satisfaction in Professional-Technical Fields," Conference Proceedings American Society of Engineering Management, 2003
• Considine, C., and A. Dean , "Active Learning in Distance Education," Conference Proceedings American Society of Engineering Education, 2003
• Dean A., P. Kauffmann, and K. Alexander, "Use of the Resulting Risk Priority Numbers from a Failure Modes and Effects Analysis on Ships Systems to Model Maintenance Assessment Policies," American Society of Naval Engineers - Fleet Maintenance Symposium Proceedings, 2003
• Kauffmann, P., and A. Dean , "Implications of Censored Data in Predicting Failure Distributions," Conference Proceedings American Society of Engineering Management, 2003
• Kauffmann, P., and A. Dean , "A Statistical Evaluation of Sea Valve Failure Rates," American Society of Naval Engineers - Fleet Maintenance Symposium Proceedings, 2003
• Dean, A., P. Kauffmann, K. Alexander, and N. Bradshaw, "Use of Risk Priority Numbers from a Failure Modes and Effects Analysis on Legacy Systems to Model Maintenance Policies," Conference Proceedings American Society of Engineering Management, 2003
• Dean A., J.D. Selby-Lucas and V. Parsons, "Managing the Marketing of Engineering Services," Conference Proceedings American Society of Engineering Management, 2002
• Parsons, V., A. Dean and A. Sousa-Poza "Adding the "Socio" Component to Project Complexity," Conference Proceedings American Society of Engineering Management, 2002

Technical Reports/ White papers

• Dean, A. and S. Peterson, "A Qualitative White Paper on Requirements Analysis for Affordability of Combatant Craft based on Total Ownership Cost," Carderock Naval Surface Warfare Center, Combatant Craft Division - Norfolk Detachment, 2007
• Dean, A. and G. Crossman, "A Qualitative White Paper on Developing a Marine Engineering Technology Option with in the Mechanical Engineering Technology Program, Department of Engineering Technology," Frank Batten College of Engineering and Technology, Old Dominion University, 2006
• Lin, C. and A. Dean, "Assembly CAD Design Using Position Tolerance in Geometric Dimensioning and Tolerancing," SME Technical Paper TP05 –PUB230, Society of Manufacturing Engineers, November 2005
• Crossman, G., C. Lin and A. Dean, "Achieving Course Objectives through Design, Simulation and Implementation: Re-Development of an Automation and Controls Laboratory, " SME Technical Paper TP05 –PUB299, Society of Manufacturing Engineers, November 2005
• Dean, A. and O. Baysal "Business Continuity and Disaster Recovery Plan - Frank Batten College of Engineering and Technology," Frank Batten College of Engineering and Technology, Old Dominion University, April 2005
• NASA Internal Studies
  • "High-Level Lunar Trade Space Definition and Analysis – Final Report," July 2004. Consulting Team Member
  • "Decision-Based Integrated Strategic Roadmap Task: Level 0 Decision Tree Structure" June 2004. Consulting Team Member

• Hagar, D., N. Bagranoff, S. Breeden, M. Danner, A. Dean, R. Dias, W. Graves, J. Hackworth, R. Lucking, B. Winstead, D. Ziegler, S. Ziel, and D. Zeigenfuss, "Old Dominion University Provost’s Ad Hoc Committee on Asynchronous Programs – Final Report," Old Dominion University, December 2003
• Dean, A. and P. Kauffman, "Implementation and Testing of a Reliability Centered Maintenance Decision Model to Support Effectiveness of SEMAT II Activities," Prepared for AMSEC, LLC (7690-812) under ODURF Project Number 724661
• Kauffman P. and A. Dean, "Feasibility of a Reliability Centered Maintenance Decision Model to Support Effectiveness of SEMAT II Activities," Prepared for AMSEC, LLC (7690-812) under ODURF Project Number 723801
• Dean, A. and Paul Kauffman, "Implementation and Testing of a Reliability Centered Maintenance Decision Model to Support Effectiveness of SEMAT II Activities," Prepared for AMSEC, LLC (7690-812) under ODURF Project Number 724661